Arria® 10 Transceiver PHY User Guide

ID 683617
Date 4/01/2024
Document Table of Contents Enabling Pseudo Random Pattern Mode

You must perform a sequence of read-modify-writes to the reconfiguration interface to enable the Pseudo Random Pattern. The read-modify-writes are required to addresses 0x082, 0x097, and 0x0AC. To enable the Pseudo Random Pattern, complete the following steps:
  1. Perform the necessary steps from steps 1 to 7 in Steps to Perform Dynamic Reconfiguration.
  2. Perform a read-modify-writ