Intel® Arria® 10 Transceiver PHY User Guide

Download
ID 683617
Date 3/28/2022
Public
Document Table of Contents

9.3.2. Linking Two Designs to Two Devices

To link two designs to two separate devices connected by one Intel® FPGA Download Cable on the same board, follow these steps:
  1. Load the design for all the Intel® Quartus® Prime project files you need.
  2. If the design does not auto-link, link each device to an appropriate design.
  3. Open the project for the second device.
  4. Link the second device on the JTAG chain to the second design (unless the design auto-links).
  5. Create a link between the channels on the devices you want to test.

Did you find the information on this page useful?

Characters remaining:

Feedback Message