Pin Planner and Assignment Editor Name
Receiver Signal Detection Voltage Threshold
Specifies signal detection voltage threshold level, Vth. The following encodings are defined:
Only used for the PCIe PIPE PHY, SATA, and SAS protocols.
The signal detect output is high when the receiver peak-to-peak differential voltage (diff p-p) > Vth x 4. For example, a setting of 6 translates to peak-to-peak differential voltage of 180mV (4*45mV). The Vdiff p-p must be > 180mV to turn on the signal detect circuit.
Pin - RX serial data
Did you find the information on this page useful?