V-Series Transceiver PHY IP Core User Guide

ID 683171
Date 7/26/2022
Document Table of Contents

10.3. Parameterizing the Custom PHY

Complete the following steps to configure the Custom PHY IP Core:
  1. Under Tools > IP Catalog, select the device family of your choice.
  2. Under Tools > IP Catalog > Interfaces > Transceiver PHY, select Custom PHY .
  3. Use the tabs on the MegaWizard Plug-In Manager to select the options required for the protocol.
  4. Refer to the following topics to learn more about the parameters:
    1. General Parameters
    2. Word Alignment Parameters
    3. Rate Match FIFO Parameters
    4. Rate Match FIFO Parameters 8B/10B Encoder and Decoder Parameters
    5. Byte Order Parameters
    6. PLL Reconfiguration Parameters
    7. Analog Parameters
  5. Click Finish to generate your parameterized Custom PHY IP Core.