Triple-Speed Ethernet Intel® FPGA IP User Guide

Download
ID 683402
Date 5/30/2022
Public
Document Table of Contents

4.2.3.6. Collision Detection

A collision happens when non-idle frames are received from the PHY and transmitted to the PHY simultaneously. Collisions can be detected only in SGMII and half-duplex mode.

When a collision happens, the collision detection state machine drives the mii_rx_col and led_col signals to 1. You can use the led_col signal as a visual check using a board LED.

Did you find the information on this page useful?

Characters remaining:

Feedback Message