External Memory Interface Handbook Volume 3: Reference Material: For UniPHY-based Device Families

ID 683841
Date 3/06/2023
Document Table of Contents Creating a Project in Platform Designer (Standard)

Before you can generate a preloader image, you must create a project in Platform Designer (Standard), as follows:
  1. On the Tools menu in the Intel® Quartus® Prime software, click Platform Designer (Standard) .
  2. Under Component library, expand Embedded Processor System, select Hard Processor System and click Add.
  3. Specify parameters for the FPGA Interfaces, Peripheral Pin Multiplexing, and HPS Clocks, based on your design requirements.
  4. On the SDRAM tab, select the SDRAM protocol for your interface.
  5. Populate the necessary parameter fields on the PHY Settings, Memory Parameters, Memory Timing, and Board Settings tabs.
  6. Add other components in your design and make the appropriate bus connections.
  7. Save the project.
  8. Click Generate on the Generation tab. Platform Designer (Standard) generates the design.