Intel® Quartus® Prime Standard Edition User Guide: Design Optimization

ID 683230
Date 11/12/2018
Public
Document Table of Contents

1.5.2. Performing a Design Exploration with the DSE II Utility

Note: Before running DSE II, specify the timing constraints for the design.

This description covers the type of settings that you need to define when you want to run a design exploration. For details about all the options available in the GUI, refer to the Intel® Quartus® Prime Help.

To perform a design exploration with the DSE II tool:

  1. Start the DSE II tool.
    If you have an open project in the Intel® Quartus® Prime software and launch DSE II, a dialog box appears asking if you want to close the Intel® Quartus® Prime software. Click Yes.
  2. In the Project page, specify the project and revision that you want to explore.
  3. In the Setup page, specify whether you want to perform a local or a remote exploration, and set up the job launch.
  4. In the Exploration page, specify optimization settings and goals.
  5. When the configuration is complete, click Start.

Did you find the information on this page useful?

Characters remaining:

Feedback Message