126.96.36.199. Timer Window for Hi-BER Checks
Timer Window for Hi-BER Checks Fields
|20:0||cycles|| Timer window for BER measurements
Sets the timer window for BER measurements in clock cycles.
The Ethernet Standard (IEEE 802.3) defines the required times for Hi-BER measurements for each rate. These times must be converted to clock cycles with accurate within +1% and -25% of the specified times.
Note: The clock rate you are using is different from the clock rate used to calculate the cycle count, you will need to scale the cycle count.
The RX PCS must be reset after changing this value.
Did you find the information on this page useful?