E-tile Hard IP User Guide: E-Tile Hard IP for Ethernet and E-Tile CPRI PHY Intel® FPGA IPs

ID 683468
Date 8/04/2021
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

2.12.5.5. Enable Automatic TX Pause Retransmission

Offset: 0x607

Enable Automatic TX Pause Retransmission Fields

Bit Name Description Access Reset
8:0 en_holdoff Enable Holdoff timer.

Turns on automatic XOFF pause frame retransmission using a holdoff timer for the corresponding tx_pfc_pause port

Bits [7:0]: For PFC

Bit [8]: For PAUSE

1: Holdoff timer enabled.
  • EHIP will transmit a new set of XOFF frames whenever the holdoff timer expires while a port or CSR request is still high for the corresponding queue
  • At power up this register defaults to 1
  • After i_csr_rst_n is asserted, this register value is set according to the module parameter flow_control_holdoff_mode
RW 0x1