DSP Builder for Intel® FPGAs (Advanced Blockset): Handbook

ID 683337
Date 12/12/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

15.4.41. NAND Gate (Nand)

The Nand block outputs the logical NAND of the input values:

q = ~(a & b)

If the number of inputs is set to 1, then output the logical NAND of all the individual bits of the input word.

.

Table 223.  Parameters for the Nand Block
Parameter Description
Number of inputs Specifies the number of inputs.
Output data type mode Determines how the block sets its output data type:
  • Inherit via internal rule: the number of integer and fractional bits is the maximum of the number of bits in the input data types.
  • Specify via dialog: you can set the output type of the block explicitly using additional fields that are available when this option is selected.This option reinterprets the output bit pattern from the LSB up according to the specified type.
  • Boolean: the output type is Boolean.
Output data type Specifies the output data type. For example, sfix(16), uint(8).
Output scaling value Specifies the output scaling value. For example, 2^-15.

.

Table 224.  Port Interface for the Nand Block
Signal Direction Type Description Vector Data Support Complex Data Support
a Input Any fixed-point type Operand 1 Yes No
b Input Any fixed-point type Operand 2 Yes No
q Output Derived fixed-point type Result Yes No