DSP Builder for Intel® FPGAs (Advanced Blockset): Handbook

ID 683337
Date 12/12/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

7. DSP Builder for Intel FPGAs (Advanced Blockset) Design Examples and Reference Designs

DSP Builder provides a variety of design examples, which you can learn from or use as a starting point for your own design.

All the design examples have the same basic structure: a top-level testbench containing an instantiated functional subsystem, which represents the hardware design.

The testbench typically includes Simulink source blocks that generate the stimulus signals and sink blocks that display simulation results. You can use other Simulink blocks to define the testbench logic.

The testbench also includes the following blocks from the DSP Builder advanced blockset:

  • The Control block specifies information about the hardware generation environment, and the top-level memory-mapped bus interface widths.
  • The ChanView block in a testbench allows you to visualize the contents of the <valid, channel, data> time-division multiplex (TDM) protocol. This block generates synthesizable HDL and can therefore also be useful in a functional subsystem.

The functional subsystem in each design contains a Device block that marks the top-level of the FPGA device and controls the target device for the hardware.