Arria® V Device Handbook: Volume 1: Device Interfaces and Integration

ID 683213
Date 10/18/2023
Document Table of Contents

9.5.1. Enabling Error Detection

To enable user mode error detection and internal scrubbing in the Intel® Quartus® Prime software, follow these steps:

  1. On the Assignments menu, click Device.
  2. In the Device dialog box, click Device and Pin Options.
  3. In the Category list, click Error Detection CRC.
  4. Turn on Enable Error Detection CRC_ERROR pin.
  5. To set the CRC_ERROR pin as output open drain, turn on Enable open drain on CRC_ERROR pin. Turning off this option sets the CRC_ERROR pin as output.
  6. To enable the on-chip error correction feature, turn on Enable internal scrubbing.
  7. In the Divide error check frequency by list, select a valid divisor.
  8. Click OK.