Intel® Quartus® Prime Standard Edition User Guide: Debug Tools

ID 683552
Date 9/24/2018
Document Table of Contents

5.1.1. Hardware and Software Requirements

You need the following hardware and software to perform logic analysis with the Signal Tap Logic Analyzer:
  • Signal Tap Logic Analyzer

    The following software includes the Signal Tap Logic Analyzer:

    • Intel® Quartus® Prime Design Software
    • Intel® Quartus® Prime Lite Edition

    Alternatively, use the Signal Tap Logic Analyzer standalone software and standalone Programmer software.

  • Download/upload cable
  • Intel® development kit or your design board with JTAG connection to device under test
Note: The Intel® Quartus® Prime Lite Edition software does not support incremental compilation integration with the Signal Tap Logic Analyzer.

During data acquisition, the memory blocks in the device store the captured data, and then transfer the data to the logic analyzer over a JTAG communication cable, such as or Intel® FPGA Download Cable.

Did you find the information on this page useful?

Characters remaining:

Feedback Message