Intel® Quartus® Prime Standard Edition User Guide: Debug Tools

ID 683552
Date 9/24/2018
Public
Document Table of Contents
Give Feedback

5.9.4.2. Debugging Using a Local PC and a Remote PC

You can use the Signal Tap Logic Analyzer to debug a design that is running on a device attached to a PC in a remote location.

To perform a remote debugging session, you must have the following setup:

  • The Intel® Quartus® Prime software installed on the local PC
  • Stand-alone Signal Tap Logic Analyzer or the full version of the Intel® Quartus® Prime software installed on the remote PC
  • Programming hardware connected to the device on the PCB at the remote location
  • TCP/IP protocol connection