Intel® Quartus® Prime Standard Edition User Guide: Debug Tools

ID 683552
Date 9/24/2018
Document Table of Contents

2.2. System Console Debugging Flow

To debug a design with the System Console, you must perform a series of steps:

  1. Add an IP Core to the Platform Designer (Standard) system.
  2. Generate the Platform Designer (Standard) system.
  3. Compile the design.
  4. Connect a board and program the FPGA.
  5. Start the System Console.
  6. Locate and open a System Console service.
  7. Perform debug operations with the service.
  8. Close the service.