DSP Builder for Intel® FPGAs (Advanced Blockset): Handbook

ID 683337
Date 7/15/2024
Public
Document Table of Contents

14.4.4. Add SLoad (AddSLoad)

The AddSLoad block performs the following function:

q = s ? v : (a + b)

If the s input is low, output the sum of the first 2 inputs, a + b, else if s is high, then output the value v.

.

Table 163.  Parameters for the AddSLoad Block
Parameter Description
Output data type mode Determines how the block sets its output data type:
  • Inherit via internal rule: the number of integer and fractional bits is the maximum of the number of bits in the input data types.
  • Inherit via internal rule with word growth: the number of fractional bits is the maximum of the number of fractional bits in the input data types. The number of integer bits is the maximum of the number of integer bits in the input data types plus one. This additional word growth allows for subtracting the most negative number from 0, which exceeds the maximum positive number that you can store in the number of bits of the input.
  • Specify via dialog: you can set the output type of the block explicitly using additional fields that are available when this option is selected. This option reinterprets the output bit pattern from the LSB up according to the specified type.
  • Boolean: the output type is Boolean.
Output data type Specifies the output data type. For example, sfix(16), uint(8).
Output scaling value Specifies the output scaling value. For example, 2^-15.

.

Table 164.  Port Interface for the AddSLoad Block
Signal Direction Type Description Vector Data Support Complex Data Support
a Input Any fixed- or floating-point type Operand 1 Yes Yes
b Input Any fixed- or floating-point type Operand 2 Yes Yes
s Output Any fixed- or floating-point type Synchronous load Yes No
v Output Any fixed- or floating-point type Value to load if s is true Yes Yes
q Output Derived fixed- or floating-point type Result Yes Yes