1. MAX® 10 FPGA Configuration Overview
2. MAX® 10 FPGA Configuration Schemes and Features
3. MAX® 10 FPGA Configuration Design Guidelines
4. MAX® 10 FPGA Configuration IP Core Implementation Guides
5. Dual Configuration Intel® FPGA IP Core References
6. Unique Chip ID Intel® FPGA IP Core References
7. Document Revision History for the MAX® 10 FPGA Configuration User Guide
3.1. Dual-Purpose Configuration Pins
3.2. Configuring MAX® 10 Devices using JTAG Configuration
3.3. Configuring MAX® 10 Devices using Internal Configuration
3.4. Implementing ISP Clamp in Quartus® Prime Software
3.5. Accessing Remote System Upgrade through User Logic
3.6. Error Detection
3.7. Enabling Data Compression
3.8. AES Encryption
3.9. MAX® 10 JTAG Secure Design Example
2.1.2. Internal Configuration
You need to program the configuration data into the configuration flash memory (CFM) before internal configuration can take place. The configuration data to be written to CFM will be part of the programmer object file (.pof). Using JTAG In-System Programming (ISP), you can program the .pof into the internal flash.
During internal configuration, MAX® 10 devices load the CRAM with configuration data from the CFM.