Intel® MAX® 10 FPGA Configuration User Guide

ID 683865
Date 3/27/2023
Public
Document Table of Contents

2.3.1. Configuration Sequence

Figure 10. Configuration Sequence for Intel® MAX® 10 Devices

You can initiate reconfiguration by pulling the nCONFIG pin low to at least the minimum t RU_nCONFIG low-pulse width. When this pin is pulled low, the nSTATUS and CONF_DONE pins are pulled low and all I/O pins are either tied to an internal weak pull-up or tri-stated based on the ICB settings.