Intel® MAX® 10 FPGA Configuration User Guide

ID 683865
Date 3/27/2023
Document Table of Contents

3.8.2. Generating .jam/.jbc/.svf file from .ekp file

To generate .jam/.jbc/.svf file from .ekp file, follow these steps:

  1. On the Tools menu, click Programmer and the Programmer dialog box will appear.
  2. In the Mode list, select JTAG as the programming mode.
  3. Click Hardware Setup. The Hardware Setup dialog box will appear.
  4. Select USBBlaster as the programming hardware in the currently selected hardware list and click Done.
  5. Click Add File and the Select Programmer File dialog box will appear.
  6. Type <filename>.ekp in the File name field and click Open.
  7. Select the .ekp file you added and click Program/Configure.
  8. On the File menu, point to Create/Update and click Create JAM, SVF, or ISC File. The Create JAM, SVF, or ISC File dialog box will appear.
  9. Select the file format required for the .ekp file in the File format field.
    • JEDEC STAPL Format (.jam)
    • Jam STAPL Byte Code (.jbc)
    • Serial Vector Format (.svf)
  10. Type the file name in the File name field, or browse to and select the file.
  11. Click OK to generate the .jam, .jbc or .svf file.