1. MAX® 10 FPGA Configuration Overview
2. MAX® 10 FPGA Configuration Schemes and Features
3. MAX® 10 FPGA Configuration Design Guidelines
4. MAX® 10 FPGA Configuration IP Core Implementation Guides
5. Dual Configuration Intel® FPGA IP Core References
6. Unique Chip ID Intel® FPGA IP Core References
7. Document Revision History for the MAX® 10 FPGA Configuration User Guide
3.1. Dual-Purpose Configuration Pins
3.2. Configuring MAX® 10 Devices using JTAG Configuration
3.3. Configuring MAX® 10 Devices using Internal Configuration
3.4. Implementing ISP Clamp in Quartus® Prime Software
3.5. Accessing Remote System Upgrade through User Logic
3.6. Error Detection
3.7. Enabling Data Compression
3.8. AES Encryption
3.9. MAX® 10 JTAG Secure Design Example
2.1.2.2. Configuration Flash Memory
The CFM is a non-volatile internal flash that is used to store configuration images. The CFM may store up to two compressed configuration images, depending on the compression and the MAX® 10 devices. The compression ratio for the configuration image should be at least 30% for the device to be able store two configuration images.
Related Information