Intel® MAX® 10 FPGA Configuration User Guide

ID 683865
Date 3/27/2023
Public
Document Table of Contents

3.4.2. Executing IPS File

To execute ISP Clamp, perform the following steps:

  1. In the Quartus Prime Programmer, select the .pof you want to program to the device.
  2. Select the .pof, right click and select Add IPS File and turn-on ISP CLAMP.
    Note: You can change the start-up delay of the I/O Clamp after configuration. To do this, select Tools > Options, turn-on the Overwrite MAX10 configuration start up delay when using IO Clamp in Programmer option, and change the delay value accordingly.
  3. Select the .pof in the Program/Configure column.
    Note: For third party programming, you can generate the .jam or .jbc file from the .pof file with .ips file.
  4. After all settings are set, click Start to start programming.