Intel® MAX® 10 FPGA Configuration User Guide

ID 683865
Date 3/27/2023
Document Table of Contents

3.2. Configuring Intel® MAX® 10 Devices using JTAG Configuration

The Intel® Quartus® Prime software generates a .sof that you can use for JTAG configuration. You can directly configure the Intel® MAX® 10 device by using a download cable with the Intel® Quartus® Prime software programmer.

Alternatively, you can use the JAM Standard Test and Programming Language (STAPL) Format File (.jam), JAM Byte Code File (.jbc), or Serial Vector Format (.svf) with other third-party programming tools. You can either:

  • Auto-generate these files
  • Manually convert them using Intel® Quartus® Prime Programmer

Did you find the information on this page useful?

Characters remaining:

Feedback Message