E-tile Hard IP User Guide: E-Tile Hard IP for Ethernet and E-Tile CPRI PHY Intel® FPGA IPs

ID 683468
Date 12/13/2021
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

2.12.5.37. Higher 2 bytes of the Destination address for RX Pause Frames

Offset: 0x708

Higher 2 bytes of the Destination address for RX Pause Frames Fields

Bit Name Description Access Reset
15:0 rx_pause_daddrh Higher bytes of the RX Flow Control Destination Address
Higher 2 bytes of the 6 byte destination address that must be found in incoming SFC and PFC frames
  • This feature requires EHIP to be in a mode with the MAC turned on
  • When this setting is changed, the RX MAC must be reset
  • At power-on, this register defaults to 16'h0F2C
  • When i_csr_rst_n is asserted, this register is set to the value given by the module parameter rx_pause_daddr[47:32]
RW 0x00000F2C