Video and Vision Processing Suite Intel® FPGA IP User Guide

ID 683329
Date 9/30/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
1. About the Video and Vision Processing Suite 2. Getting Started with the Video and Vision Processing IPs 3. Video and Vision Processing IPs Functional Description 4. Video and Vision Processing IP Interfaces 5. Video and Vision Processing IP Registers 6. Video and Vision Processing IPs Software Programming Model 7. Protocol Converter Intel® FPGA IP 8. 3D LUT Intel® FPGA IP 9. AXI-Stream Broadcaster Intel® FPGA IP 10. Chroma Key Intel® FPGA IP 11. Chroma Resampler Intel® FPGA IP 12. Clipper Intel® FPGA IP 13. Clocked Video Input Intel® FPGA IP 14. Clocked Video to Full-Raster Converter Intel® FPGA IP 15. Clocked Video Output Intel® FPGA IP 16. Color Space Converter Intel® FPGA IP 17. Deinterlacer Intel® FPGA IP 18. FIR Filter Intel® FPGA IP 19. Frame Cleaner Intel® FPGA IP 20. Full-Raster to Clocked Video Converter Intel® FPGA IP 21. Full-Raster to Streaming Converter Intel® FPGA IP 22. Generic Crosspoint Intel® FPGA IP 23. Genlock Signal Router Intel® FPGA IP 24. Guard Bands Intel® FPGA IP 25. Interlacer Intel® FPGA IP 26. Mixer Intel® FPGA IP 27. Pixels in Parallel Converter Intel® FPGA IP 28. Scaler Intel® FPGA IP 29. Stream Cleaner Intel® FPGA IP 30. Switch Intel® FPGA IP 31. Tone Mapping Operator Intel® FPGA IP 32. Test Pattern Generator Intel® FPGA IP 33. Video Frame Buffer Intel® FPGA IP 34. Video Streaming FIFO Intel® FPGA IP 35. Video Timing Generator Intel® FPGA IP 36. Warp Intel® FPGA IP 37. Design Security 38. Document Revision History for Video and Vision Processing Suite User Guide

22.2. Generic Crosspoint IP Parameters

The IP offers compile-time parameters.
Table 325.  Generic Crosspoint IP Parameters
Parameter Values Description
Control Settings
Memory-mapped control interface True or false Turn on for the memory-mapped control interface
Separate clock for control interface True or false

Turn on to run the run-time control interface on a different clock domain.

Crosspoint Settings
Crosspoint port width 1 to 1024 Width of crosspoint input and output ports in bits
Input (Per Input Interface)
Number of inputs 1 to 32 Number of crosspoint input ports
Conduit Signal type User-defined string Set the signal type of the input to match the type of the conduit it connects to.
Conduit associated clock True or false The conduit that the IP connects to may or may not have an associated clock set. This parameter sets the associated clock parameter of the input to main_clock.
Output (Per Output Interface)
Number of outputs 1 to 32 Number of crosspoint output ports
Default input 0 to 31 The output port selects this input by default out of reset. If run-time configuration is disabled, this setting is fixed.
Conduit Signal type User-defined string Set the signal type of the output to match the type of the conduit it connects to.
Conduit associated clock True or false The conduit that the IP connects to may or may not have an associated clock. This parameter sets the associated clock parameter of the output to main_clock