Agilex™ 7 FPGAs and SoCs Device Data Sheet: F-Series and I-Series
ID
683301
Date
8/29/2025
Public
Recommended Operating Conditions
E-Tile Transceiver Power Supply Recommended Operating Conditions
P-Tile Transceiver Power Supply Recommended Operating Conditions
R-Tile Transceiver Power Supply Recommended Operating Conditions
F-Tile Transceiver Power Supply Recommended Operating Conditions
HPS Power Supply Recommended Operating Conditions
Single-Ended I/O Standards Specifications
Single-Ended SSTL, HSTL, HSUL, and POD I/O Reference Voltage Specifications
Single-Ended SSTL, HSTL, HSUL, and POD I/O Standards Signal Specifications
Differential SSTL, HSTL, and HSUL I/O Standards Specifications
Differential POD I/O Standards Specifications
Differential I/O Standards Specifications
HPS Clock Performance
HPS Internal Oscillator Frequency
HPS PLL Specifications
HPS Cold Reset
HPS SPI Timing Characteristics
HPS SD/MMC Timing Characteristics
HPS USB UPLI Timing Characteristics
HPS Ethernet Media Access Controller (EMAC) Timing Characteristics
HPS I2C Timing Characteristics
HPS NAND Timing Characteristics
HPS Trace Timing Characteristics
HPS GPIO Interface
HPS JTAG Timing Characteristics
HPS Programmable I/O Timing Characteristics
HPS GPIO Interface
The general-purpose I/O (GPIO) interface has debounce circuitry included to remove signal glitches. The debounce clock frequency ranges from 125 Hz to 32 kHz. The minimum pulse width is 1 debounce clock cycle and the minimum detectable GPIO pulse width is 62.5 µs (at 32 kHz).
If the external signal is driven into the GPIO for less than one clock cycle, the external signal is filtered. If the external signal is between one and two clock cycles, the external signal may or may not be filtered depending on the phase of the signal. If the external signal is more than two clock cycles, the external signal is not filtered.