Intel® Stratix® 10 Configuration User Guide

ID 683762
Date 5/30/2022
Public
Document Table of Contents

3.2.10.2. Programming .pof files into Serial Flash Device

To program the .pof into the serial flash device through the AS header, perform the following steps:

  1. In the Programmer window, click Hardware Setup and select the desired download cable.
  2. In the Mode list, select Active Serial Programming.
  3. Click Auto Detect button on the left pane.
  4. Select the device to be programmed and click Add File.
  5. Select the .pof to be programmed to the selected device.
  6. Click Start to start programming.

Did you find the information on this page useful?

Characters remaining:

Feedback Message