Visible to Intel only — GUID: bhc1411020163331
Ixiasoft
1. About the Video and Image Processing Suite
2. Avalon Streaming Video
3. Clocked Video
4. VIP Run-Time Control
5. Getting Started
6. VIP Connectivity Interfacing
7. Clocked Video Interface IPs
8. 2D FIR II IP Core
9. Mixer II IP Core
10. Clipper II IP Core
11. Color Plane Sequencer II IP Core
12. Color Space Converter II IP Core
13. Chroma Resampler II IP Core
14. Control Synchronizer IP Core
15. Deinterlacer II IP Core
16. Frame Buffer II IP Core
17. Gamma Corrector II IP Core
18. Configurable Guard Bands IP Core
19. Interlacer II IP Core
20. Scaler II IP Core
21. Switch II IP Core
22. Test Pattern Generator II IP Core
23. Trace System IP Core
24. Warp Lite Intel FPGA IP
25. Avalon-ST Video Stream Cleaner IP Core
26. Avalon-ST Video Monitor IP Core
27. VIP IP Core Software Control
28. Security Considerations
29. Video and Image Processing Suite User Guide Archives
30. Document Revision History for the Video and Image Processing Suite User Guide
A. Avalon-ST Video Verification IP Suite
7.1. Supported Features for Clocked Video Output II IP
7.2. Control Port
7.3. Clocked Video Input IP Format Detection
7.4. Clocked Video Output IP Video Modes
7.5. Clocked Video Output II Latency Mode
7.6. Generator Lock
7.7. Underflow and Overflow
7.8. Timing Constraints
7.9. Handling Ancillary Packets
7.10. Modules for Clocked Video Input II IP Core
7.11. Clocked Video Input II Signals, Parameters, and Registers
7.12. Clocked Video Output II Signals, Parameters, and Registers
15.1. Deinterlacing Algorithm Options
15.2. Deinterlacing Algorithms
15.3. Run-time Control
15.4. Pass-Through Mode for Progressive Frames
15.5. Cadence Detection (Motion Adaptive Deinterlacing Only)
15.6. Avalon-MM Interface to Memory
15.7. Motion Adaptive Mode Bandwidth Requirements
15.8. Avalon-ST Video Support
15.9. 4K Video Passthrough Support
15.10. Behavior When Unexpected Fields are Received
15.11. Handling of Avalon-ST Video Control Packets
15.12. Deinterlacer II Parameter Settings
15.13. Deinterlacing Control Registers
A.3.1. c_av_st_video_control
A.3.2. c_av_st_video_data
A.3.3. c_av_st_video_file_io
A.3.4. c_av_st_video_item
A.3.5. c_av_st_video_source_sink_base
A.3.6. c_av_st_video_sink_bfm_’SINK
A.3.7. c_av_st_video_source_bfm_’SOURCE
A.3.8. c_av_st_video_user_packet
A.3.9. c_pixel
A.3.10. av_mm_transaction
A.3.11. av_mm_master_bfm_`MASTER_NAME
A.3.12. av_mm_slave_bfm_`SLAVE_NAME
A.3.13. av_mm_control_register
A.3.14. av_mm_control_base
Visible to Intel only — GUID: bhc1411020163331
Ixiasoft
12.5. Color Space Conversion Control Registers
The width of each register in the Color Space Conversion control register map is 32 bits. To convert from fractional values, simply move the binary point right by the number of fractional bits specified in the user interface.
The control data is read once at the start of each frame and is buffered inside the IP core, so the registers can be safely updated during the processing of a frame.
Address | Register | Description |
---|---|---|
0 | Control | Bit 0 of this register is the Go bit, all other bits are unused. Setting this bit to 0 causes the IP core to stop the next time control information is read. |
1 | Status | Bit 0 of this register is the Status bit, all other bits are unused. |
2 | Interrupts | Unused. |
3 | Coeff-commit | Writing a 1 to this location commits the writing of coefficient data. You must make this write to swap the coefficients currently in use with the latest set written to the register map. |
4 | Coefficient A0 | The coefficient and summand registers use integer, signed 2’s complement numbers. Refer to Color Space Conversion. |
5 | Coefficient B0 | |
6 | Coefficient C0 | |
7 | Coefficient A1 | |
8 | Coefficient B1 | |
9 | Coefficient C1 | |
10 | Coefficient A2 | |
11 | Coefficient B2 | |
12 | Coefficient C2 | |
13 | Summand S0 | |
14 | Summand S1 | |
15 | Summand S2 |