DisplayPort Intel® FPGA IP User Guide

ID 683273
Date 1/24/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

3.2. Specifying IP Parameters and Options

Follow these steps to specify the DisplayPort IP parameters and options.
  1. Create an Intel® Quartus® Prime project using the New Project Wizard available from the File menu.
  2. On the Tools menu, click IP Catalog.
  3. Under Installed IP, double-click Library > Interface Protocols > Audio&Video > DisplayPort Intel® FPGA IP .
    The parameter editor appears.
  4. In the parameter editor, specify a top-level name for your custom IP variation. This name identifies the IP core variation files in your project. If prompted, also specify the targeted Intel FPGA family and output file HDL preference. Click OK.
  5. Specify parameters and options in the DisplayPort parameter editor:
    • Optionally select preset parameter values. Presets specify all initial parameter values for specific applications (where provided).
    • Specify parameters defining the IP core functionality, port configurations, and device-specific features.
    • Specify options for processing the IP core files in other EDA tools.
  6. Click Generate to generate the IP and supporting files, including simulation models.
  7. Click Close when file generation completes.
  8. Click Finish.
  9. If you generate the DisplayPort Intel® FPGA IP instance in an Intel® Quartus® Prime project, you are prompted to add Intel® Quartus® Prime IP File (.qip) and Intel® Quartus® Prime Simulation IP File (.sip) to the current Intel® Quartus® Prime project.

Did you find the information on this page useful?

Characters remaining:

Feedback Message