Visible to Intel only — GUID: jfz1477373041682
Ixiasoft
Visible to Intel only — GUID: jfz1477373041682
Ixiasoft
10.3.5. DPTX_RECONFIG
RECONFIG_ANALOG drives the tx_analog_reconfig_req while RECONFIG_LINKRATE drives tx_reconfig_req port. GXB_BUSY is indicator of tx_reconfig_busy port.
Address: 0x0014
Direction: RW
Reset: 0x00000000
Bit |
Bit Name |
Function |
---|---|---|
31 |
GXB_BUSY | Read-only flag where:
|
30:2 |
Unused |
|
1 |
RECONFIG_LINKRATE | 1 = Reconfigure the transceiver with the link rate in DPTX_TX_CONTROL (TX_LINK_RATE) When you set this bit to 1, it automatically clears (0) after one clock cycle. |
0 |
RECONFIG_ANALOG | 1 = Reconfigure transceiver with analog values in DPTX_PRE_VOLT0-3 When you set this bit to 1, it automatically clears (0) after one clock cycle. |
Did you find the information on this page useful?
Feedback Message
Characters remaining: