External Memory Interfaces Intel® Cyclone® 10 GX FPGA IP User Guide

ID 683663
Date 3/29/2021
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

10.7.1.7. Example Tcl Script for Running the EMIF Debug Toolkit

If you want, you can run the EMIF Debug Toolkit using a Tcl script. The following example Tcl script is applicable to all device families.

The following example Tcl script opens a file, runs the debug toolkit, and writes the resulting calibration reports to a file.

You should adjust the variables in the script to match your design. You can then run the script using the command quartus_sh -t example.tcl.

# Modify the following variables for your project
set project "ed_synth.qpf"
# Index of the programming cable.  Can be listed using "get_hardware_names"
set hardware_index 1
# Index of the device on the specified cable. Can be listed using "get_device_names"
set device_index 1
# SOF file containing the EMIF to debug
set sof "ed_synth.sof"
# Connection ID of the EMIF debug interface.  Can be listed using "get_connections"
set connection_id 2
# Output file
set report "toolkit.rpt"

# The following code opens a project and writes its calibration reports to a file.
project_open $project
load_package ::quartus::external_memif_toolkit
initialize_connections
set hardware_name [lindex [get_hardware_names] $hardware_index]
set device_name [lindex [get_device_names -hardware_name $hardware_name] $device_index]
link_project_to_device -device_name $device_name -hardware_name $hardware_name -sof_file $sof
establish_connection -id $connection_id
create_connection_report -id $connection_id -report_type summary
create_connection_report -id $connection_id -report_type calib
write_connection_target_report -id $connection_id -file $report