Triple-Speed Ethernet Intel® FPGA IP User Guide

ID 683402
Date 7/22/2024
Public
Document Table of Contents

B.1. Functionality Configuration Parameters

You can use these parameters to enable or disable specific functionality in the MAC and PCS.
Table 127.  IP Functionality Configuration Parameters
Parameter Description Default
Supported in configurations that contain the 10/100/1000 Ethernet MAC
ETH_MODE 10: Enables MII.

100: Enables MII.

1000: Enables GMII.

1000
HD_ENA Sets the HD_ENA bit in the command_config register. See Command_Config Register (Dword Offset 0x02). 0
TB_MACPAUSEQ Sets the pause_quant register. See Base Configuration Registers (Dword Offset 0x00 – 0x17). 15
TB_MACIGNORE_PAUSE Sets the PAUSE_IGNORE bit in the command_config register. See Command_Config Register (Dword Offset 0x02). 0
TB_MACFWD_PAUSE Sets the PAUSE_FWD bit in the command_config register. See Command_Config Register (Dword Offset 0x02). 0
TB_MACFWD_CRC Sets the CRC_FWD bit in the command_config register. See Command_Config Register (Dword Offset 0x02). 0
TB_MACINSERT_ADDR Sets the ADDR_INS bit in the command_config register. See Command_Config Register (Dword Offset 0x02). 0
TB_PROMIS_ENA Sets the PROMIS_EN bit in the command_config register. See Command_Config Register (Dword Offset 0x02). 1
TB_MACPADEN Sets the PAD_EN bit in the command_config register. See Command_Config Register (Dword Offset 0x02). 1
TB_MACLENMAX Maximum frame length. 1518
TB_IPG_LENGTH Sets the tx_ipg_length register. See Base Configuration Registers (Dword Offset 0x00 – 0x17). 12
TB_MDIO_ADDR0 Sets the mdio_addr0 register. See Base Configuration Registers (Dword Offset 0x00 – 0x17). 0
TB_MDIO_ADDR1 Sets the mdio_addr1 register. See Base Configuration Registers (Dword Offset 0x00 – 0x17). 1
TX_FIFO_AE Sets the tx_almost_empty register. See Base Configuration Registers (Dword Offset 0x00 – 0x17). 8
TX_FIFO_AF Sets the tx_almost_full register. See Base Configuration Registers (Dword Offset 0x00 – 0x17). 10
RX_FIFO_AE Sets the rx_almost_empty register. See Base Configuration Registers (Dword Offset 0x00 – 0x17). 8
RX_FIFO_AF Sets the rx_almost_full register. See Base Configuration Registers (Dword Offset 0x00 – 0x17). 8
TX_FIFO_SECTION_EMPTY Sets the tx_section_empty register. See Base Configuration Registers (Dword Offset 0x00 – 0x17). 16
TX_FIFO_SECTION_FULL Sets the tx_section_full register. See Base Configuration Registers (Dword Offset 0x00 – 0x17). 16
RX_FIFO_SECTION_EMPTY Sets the rx_section_empty register. See Base Configuration Registers (Dword Offset 0x00 – 0x17). 0
RX_FIFO_SECTION_FULL Sets the rx_section_full register. See Base Configuration Registers (Dword Offset 0x00 – 0x17). 16
MCAST_TABLEN Specifies the first n addresses from MCAST_ADDRESSLIST from which multicast address is selected. 9
MCAST_ADDRESSLIST A list of multicast addresses. 0x887654332211 0x886644352611 0xABCDEF012313 0x92456545AB15 0x432680010217 0xADB589215439 0xFFEACFE3434B 0xFFCCDDAA3123 0xADB358415439
Supported in configurations that contain the 1000BASE-X/SGMII PCS
TB_SGMII_ENA Sets the SGMII_ENA bit in the if_mode register. See If_Mode Register (Word Offset 0x14). 0
TB_SGMII_AUTO_CONF Sets the USE_GMII_AN bit in the if_mode register. See If_Mode Register (Word Offset 0x14). 0