AN 802: Intel® Stratix® 10 SoC Device Design Guidelines

ID 683117
Date 12/14/2020
Document Table of Contents

2.3.2. HPS I/O Settings: Constraints and Drive Strengths

GUIDELINE: Ensure that you have correctly configured the I/O settings for the HPS Dedicated I/O.

The HPS pin location assignments are managed automatically when you generate the Platform Designer system containing the HPS. Likewise, timing and I/O constraints for the HPS SDRAM interface are managed by the Intel® Stratix® 10 External Memory Interfaces for HPS IP. You must manage the following I/O constraints for the HPS Dedicated I/O using the Intel® Quartus® Prime software in the same way as for FPGA I/O: drive strength, weak pull-up enables, and termination settings. Any peripherals configured to use FPGA I/O must also be fully constrained, including pin locations, using the Intel® Quartus® Prime software.

Did you find the information on this page useful?

Characters remaining:

Feedback Message