Intel® Agilex™ Hard Processor System Technical Reference Manual

ID 683567
Date 2/14/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

A.3. Device Response to External Configuration and Reset Events

The following table summarizes the device response to various external configuration and reset events.
Note: The HPS_COLD_RESET pin serves both as an input to reset the HPS and as an output to the external system to indicate that the HPS is in reset. Do not connect HPS_COLD_nRESET to the external flash. The SDM controls the reset of the external flash separately.
Action Power Cycle nCONFIG HPS_COLD_RESET
Wipe the FPGA  
Sample MSEL    
Reads fuses    
Runs SDM Boot ROM code    
Resets the SDM    
Resets the HPS
Note: When using QSPI, you can also use Remote System Update (RSU) to load a specific image with the same device responses as nCONFIG.