R-tile Avalon® Streaming Intel® FPGA IP for PCI Express* User Guide

ID 683501
Date 10/06/2021
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

5.2.2.1. VirtIO Supported Features List

  • VirtIO devices are implemented as PCI Express devices.
  • Support 8 PFs and 2K VFs VirtIO capability structure (for Port 0 and Port 1).
  • Configuration Intercept Interface in the R-tile IP for PCIe (EP mode only) is provided for VirtIO transport.
  • Five VirtIO device configuration structures are supported:
    • Common configuration
    • Notifications
    • ISR Status
    • Device-specific configuration (optional)
    • PCI configuration access
  • Location of each structure is specified using a vendor-specific PCI capability located in the PCI configuration space of the device.
  • VirtIO capability structure uses little-endian format.
  • All fields of the VirtIO capability structure are read-only for the driver by default.
  • Support PFs and VFs FLR
    Note: The Read/Write registers in the VF and PF VirtIO capability registers are not reset by FLR.
  • Supports x16 and x8 cores.
  • MSI is not supported with VirtIO.
    Note: In the 21.3 release of Intel® Quartus® Prime, when you enable the VirtIO feature, all the PFs in the Hard IP must support VirtIO. The configuration where some PFs support VirtIO and some PFs support MSI is not available.