L- and H-Tile Avalon® Streaming and Single Root I/O Virtualization (SR-IOV) Intel® FPGA IP for PCI Express* User Guide

ID 683111
Date 9/12/2024
Public
Document Table of Contents

3.12. Reset

This interface indicates when the clocks are stable and FPGA configuration is complete.

The PCIe IP core receives the following inputs that can be used for the reset purpose:
  • pin_perst is the active low reset driven from the PCIe motherboard. Logic on the motherboard autonomously generates this fundamental reset signal.
  • npor is an active low reset signal. The Application drives this reset signal.
  • ninit_done is an active low input signal. A "1" indicates that the FPGA device is not yet fully configured. A "0" indicates the device has been configured and is in normal operating mode. To use the ninit_done input, instantiate the Reset Release Intel FPGA IP in your design and use its ninit_done output to drive the input of the Avalon® streaming IP for PCIe. For more details on how to use this input, refer to Including the Reset Release Intel® FPGA IP in Your Design.

The PCIe IP core reset logic requires a free-running clock input. This free-running clock becomes stable after the secure device manager (SDM) block asserts iocsrrdy_dly indicating that the I/O Control and Status registers programming is complete.