External Memory Interfaces Arria® 10 FPGA IP User Guide

ID 683106
Date 4/01/2024
Public
Document Table of Contents

10.1.5. Intel Arria 10 EMIF IP RLDRAM 3 Parameters: Board

Table 340.  Group: Board / Intersymbol Interference/Crosstalk
Display Name Description
Use default ISI/crosstalk values You can enable this option to use default intersymbol interference and crosstalk values for your topology. Note that the default values are not optimized for your board. For optimal signal integrity, it is recommended that you do not enable this parameter, but instead perform I/O simulation using IBIS models and Hyperlynx)*, and manually enter values based on your simulation results, instead of using the default values. (Identifier: BOARD_RLD3_USE_DEFAULT_ISI_VALUES)
Address and command ISI/crosstalk The address and command window reduction due to ISI and crosstalk effects. The number to be entered is the total loss of margin on both the setup and hold sides (measured loss on the setup side + measured loss on the hold side). Refer to the EMIF Simulation Guidance wiki page for additional information. (Identifier: BOARD_RLD3_USER_AC_ISI_NS)
QK/QK# ISI/crosstalk QK/QK# ISI/crosstalk describes the reduction of the read data window due to intersymbol interference and crosstalk effects on the QK/QK# signal when driven by the memory device during a read. The number to be entered is the total loss of margin on both the setup and hold sides (measured loss on the setup side + measured loss on the hold side). Refer to the EMIF Simulation Guidance wiki page for additional information. (Identifier: BOARD_RLD3_USER_RCLK_ISI_NS)
Read DQ ISI/crosstalk The reduction of the read data window due to ISI and crosstalk effects on the DQ signal when driven by the memory device during a read. The number to be entered is the total loss of margin on the setup and hold side (measured loss on the setup side + measured loss on the hold side). Refer to the EMIF Simulation Guidance wiki page for additional information. (Identifier: BOARD_RLD3_USER_RDATA_ISI_NS)
DK/DK# ISI/crosstalk DK/DK# ISI/crosstalk describes the reduction of the write data window due to intersymbol interference and crosstalk effects on the DK/DK# signal when driven by the FPGA during a write. The number to be entered is the total loss of margin on the setup and hold side (measured loss on the setup side + measured loss on the hold side). Refer to the EMIF Simulation Guidance wiki page for additional information. (Identifier: BOARD_RLD3_USER_WCLK_ISI_NS)
Write DQ ISI/crosstalk The reduction of the write data window due to ISI and crosstalk effects on the DQ signal when driven by the FPGA during a write. The number to be entered is the total loss of margin on the setup and hold side (measured loss on the setup side + measured loss on the hold side). Refer to the EMIF Simulation Guidance wiki page for additional information. (Identifier: BOARD_RLD3_USER_WDATA_ISI_NS)
Table 341.  Group: Board / Board and Package Skews
Display Name Description
Package deskewed with board layout (QK group) If you are compensating for package skew on the QK bus in the board layout (hence checking the box here), please include package skew in calculating the following board skew parameters. (Identifier: BOARD_RLD3_IS_SKEW_WITHIN_QK_DESKEWED)
Maximum board skew within QK group Maximum board skew within QK group refers to the largest skew between all DQ and DM pins in a QK group. This value can affect the read capture and write margins. (Identifier: BOARD_RLD3_BRD_SKEW_WITHIN_QK_NS)
Maximum system skew within QK group The largest skew between all DQ and DM pins in a QK group. Enter combined board and package skew. This value affects the read capture and write margins. (Identifier: BOARD_RLD3_PKG_BRD_SKEW_WITHIN_QK_NS)
Package deskewed with board layout (address/command bus) Enable this parameter if you are compensating for package skew on the address, command, control, and memory clock buses in the board layout. Include package skew in calculating the following board skew parameters. (Identifier: BOARD_RLD3_IS_SKEW_WITHIN_AC_DESKEWED)
Maximum board skew within address/command bus The largest skew between the address and command signals. Enter the board skew only; package skew is calculated automatically, based on the memory interface configuration, and added to this value. (Identifier: BOARD_RLD3_BRD_SKEW_WITHIN_AC_NS)
Maximum system skew within address/command bus Maximum system skew within address/command bus refers to the largest skew between the address and command signals. (Identifier: BOARD_RLD3_PKG_BRD_SKEW_WITHIN_AC_NS)
Average delay difference between DK and CK This parameter describes the average delay difference between the DK signals and the CK signal, calculated by averaging the longest and smallest DK trace delay minus the CK trace delay. Positive values represent DK signals that are longer than CK signals and negative values represent DK signals that are shorter than CK signals. (Identifier: BOARD_RLD3_DK_TO_CK_SKEW_NS)
Maximum delay difference between devices This parameter describes the largest propagation delay on the DQ signals between ranks.

For example, in a two-rank configuration where devices are placed in series, there is an extra propagation delay for DQ signals going to and coming back from the furthest device compared to the nearest device. This parameter is only applicable when there is more than one rank.

(Identifier: BOARD_RLD3_SKEW_BETWEEN_DIMMS_NS)
Maximum skew between DK groups This parameter describes the largest skew between DK signals in different DK groups. (Identifier: BOARD_RLD3_SKEW_BETWEEN_DK_NS)
Average delay difference between address/command and CK The average delay difference between the address/command signals and the CK signal, calculated by averaging the longest and smallest address/command signal trace delay minus the maximum CK trace delay. Positive values represent address and command signals that are longer than CK signals and negative values represent address and command signals that are shorter than CK signals. (Identifier: BOARD_RLD3_AC_TO_CK_SKEW_NS)
Maximum CK delay to device The maximum CK delay to device refers to the delay of the longest CK trace from the FPGA to any device. (Identifier: BOARD_RLD3_MAX_CK_DELAY_NS)
Maximum DK delay to device The maximum DK delay to device refers to the delay of the longest DK trace from the FPGA to any device. (Identifier: BOARD_RLD3_MAX_DK_DELAY_NS)