External Memory Interfaces Intel® Arria® 10 FPGA IP User Guide

ID 683106
Date 12/19/2023
Public
Document Table of Contents

8.1.6. Intel Arria 10 EMIF IP QDR II/II+/II+ Xtreme Parameters: Controller

Table 282.  Group: Controller
Display Name Description
Maximum Avalon-MM burst length Specifies the maximum burst length on the Avalon-MM bus. This will be used to configure the FIFOs to be able to manage the maximum data burst. More core logic will be required for an increase in FIFO length. (Identifier: CTRL_QDR2_AVL_MAX_BURST_COUNT)
Generate power-of-2 data bus widths for Qsys If enabled, the Avalon data bus width is rounded down to the nearest power-of-2. The width of the symbols within the data bus is also rounded down to the nearest power-of-2. You should only enable this option if you know you will be connecting the memory interface to Qsys interconnect components that require the data bus and symbol width to be a power-of-2. If this option is enabled, you cannot utilize the full density of the memory device.

For example, in x36 data width upon selecting this parameter, will define the Avalon data bus to 256-bit. This will ignore the upper 4-bit of data width.

(Identifier: CTRL_QDR2_AVL_ENABLE_POWER_OF_TWO_BUS)