Supply Current and Power Consumption I/O Pin Leakage Current Bus Hold Parameters Series OCT without Calibration Specifications Series OCT with Calibration at Device Power-Up Specifications OCT Variation after Calibration at Device Power-Up Pin Capacitance Internal Weak Pull-Up Resistor Hot-Socketing Specifications Hysteresis Specifications for Schmitt Trigger Input
Single-Ended I/O Standards Specifications Single-Ended SSTL, HSTL, and HSUL I/O Reference Voltage Specifications Single-Ended SSTL, HSTL, and HSUL I/O Standards Signal Specifications Differential SSTL I/O Standards Specifications Differential HSTL and HSUL I/O Standards Specifications Differential I/O Standards Specifications
True PPDS and Emulated PPDS_E_3R Transmitter Timing Specifications True RSDS and Emulated RSDS_E_3R Transmitter Timing Specifications Emulated RSDS_E_1R Transmitter Timing Specifications True Mini-LVDS and Emulated Mini-LVDS_E_3R Transmitter Timing Specifications True LVDS Transmitter Timing Emulated LVDS_E_3R, SLVS, and Sub-LVDS Transmitter Timing Specifications LVDS, TMDS, HiSpi, SLVS, and Sub-LVDS Receiver Timing Specifications
Intel® MAX® 10 FPGA Device Datasheet
This datasheet describes the electrical characteristics, switching characteristics, configuration specifications, and timing for Intel® MAX® 10 devices.
|Device Grade||Speed Grade Supported|
Note: The –A6 speed grade of the Intel® MAX® 10 FPGA devices is not available by default in the Intel® Quartus® Prime software. Contact your local Intel sales representatives for support.