Intel® Arria® 10 Device Datasheet

ID 683771
Date 2/14/2022
Document Table of Contents

HPS Power Supply Operating Conditions

Table 6.  HPS Power Supply Operating Conditions for Intel® Arria® 10 SX DevicesThis table lists the steady-state voltage and current values expected from Intel® Arria® 10 system-on-a-chip (SoC) devices with ARM*-based hard processor system (HPS). Power supply ramps must all be strictly monotonic, without plateaus. Refer to Recommended Operating Conditions for Intel® Arria® 10 Devices table for the steady-state voltage values expected from the FPGA portion of the Intel® Arria® 10 SoC devices.
Symbol Description Condition Minimum 23 Typical Maximum 23 Unit
VCCL_HPS HPS core voltage and periphery circuitry power supply 0.9 V 24 0.87 0.9 0.93 V
0.95 V 24 0.92 0.95 0.98 V
VCCIO_HPS HPS I/O buffers power supply 3.0 V 2.85 3.0 3.15 V
2.5 V 2.375 2.5 2.625 V
1.8 V 1.71 1.8 1.89 V
VCCIOREF_HPS HPS I/O pre-driver power supply 1.71 1.8 1.89 V
VCCPLL_HPS HPS PLL analog voltage regulator power supply 1.71 1.8 1.89 V
23 This value describes the budget for the DC (static) power supply tolerance and does not include the dynamic tolerance requirements. Refer to the PDN tool for the additional budget for the dynamic tolerance requirements.
24 VCCL_HPS options are valid under the operating conditions specified in the Maximum HPS Clock Frequencies table.