Intel® Arria® 10 Device Datasheet

Download
ID 683771
Date 2/14/2022
Public
Document Table of Contents

Single-Ended SSTL, HSTL, and HSUL I/O Standards Signal Specifications

Table 16.  Single-Ended SSTL, HSTL, and HSUL I/O Standards Signal Specifications for Intel® Arria® 10 Devices
I/O Standard VIL(DC)  (V) VIH(DC) (V) VIL(AC) (V) VIH(AC) (V) VOL (V) VOH (V) IOL 31 (mA) IOH 31 (mA)
Min Max Min Max Max Min Max Min
SSTL-18 Class I –0.3 VREF –0.125 VREF + 0.125 VCCIO + 0.3 VREF – 0.25 VREF + 0.25 VTT – 0.603 VTT + 0.603 6.7 –6.7
SSTL-18 Class II –0.3 VREF –0.125 VREF + 0.125 VCCIO + 0.3 VREF – 0.25 VREF + 0.25 0.28 VCCIO –0.28 13.4 –13.4
SSTL-15 Class I VREF – 0.1 VREF + 0.1 VREF – 0.175 VREF + 0.175 0.2 × VCCIO 0.8 × VCCIO 8 –8
SSTL-15 Class II VREF – 0.1 VREF + 0.1 VREF – 0.175 VREF + 0.175 0.2 × VCCIO 0.8 × VCCIO 16 –16
SSTL-135/ SSTL-135 
Class I, II VREF – 0.09 VREF + 0.09 VREF – 0.16 VREF + 0.16 0.2 × VCCIO 0.8 × VCCIO
SSTL-125/ SSTL-125 
Class I, II VREF – 0.09 VREF + 0.09 VREF – 0.15 VREF + 0.15 0.2 × VCCIO 0.8 × VCCIO
SSTL-12/ SSTL-12 
Class I, II VREF – 0.10 VREF + 0.10 VREF – 0.15 VREF + 0.15 0.2 × VCCIO 0.8 × VCCIO
HSTL-18 Class I VREF –0.1 VREF + 0.1 VREF – 0.2 VREF + 0.2 0.4 VCCIO – 0.4 8 –8
HSTL-18 Class II VREF – 0.1 VREF + 0.1 VREF – 0.2 VREF + 0.2 0.4 VCCIO – 0.4 16 –16
HSTL-15 Class I VREF – 0.1 VREF + 0.1 VREF – 0.2 VREF + 0.2 0.4 VCCIO – 0.4 8 –8
HSTL-15 Class II VREF – 0.1 VREF + 0.1 VREF – 0.2 VREF + 0.2 0.4 VCCIO –0.4 16 –16
HSTL-12 Class I –0.15 VREF – 0.08 VREF + 0.08 VCCIO + 0.15 VREF – 0.15 VREF + 0.15 0.25 × VCCIO 0.75 × VCCIO 8 –8
HSTL-12 Class II –0.15 VREF – 0.08 VREF + 0.08 VCCIO + 0.15 VREF – 0.15 VREF + 0.15 0.25 × VCCIO 0.75 × VCCIO 16 –16
HSUL-12 VREF – 0.13 VREF + 0.13 VREF – 0.22 VREF + 0.22 0.1 × VCCIO 0.9 × VCCIO
POD12 –0.15 VREF – 0.08 VREF + 0.08 VCCIO + 0.15 VREF – 0.15 VREF + 0.15 (0.7 – 0.15) × VCCIO (0.7 + 0.15) × VCCIO
31 To meet the IOL and IOH specifications, you must set the current strength settings accordingly. For example, to meet the SSTL15CI specification (8 mA), you should set the current strength settings to 8 mA. Setting at lower current strength may not meet the IOL and IOH specifications in the datasheet.

Did you find the information on this page useful?

Characters remaining:

Feedback Message