Intel® MAX® 10 Analog to Digital Converter User Guide

ID 683596
Date 5/04/2021
Document Table of Contents Guidelines: ADC Sequencer in Modular Dual ADC Core IP Core

Follow these sequencer guidelines if you use dual ADC blocks with the Modular Dual ADC Core IP core.
  • The conversion sequence length of both ADC blocks must be the same.
  • You can configure independent patterns for the conversion sequence of each ADC blocks.
  • You can set a sequencer slot in ADC2 to NULL. If you set the slot to NULL, ADC2 will perform a dummy conversion for the slot with output of "0". The NULL option is available only for ADC2.
  • The temperature sensor is available only in ADC1. If you configure a sequencer slot in ADC1 for temperature sensing, you must set the same sequencer slot number in ADC2 to NULL.

Did you find the information on this page useful?

Characters remaining:

Feedback Message