Intel Agilex® 7 Hard Processor System Technical Reference Manual

ID 683567
Date 1/11/2024
Public
Document Table of Contents

25.5.3.2. Triggering a Flush of Trace Data to the TPIU

A particular soft logic signal in the FPGA connected to a trigger input in the FPGA-CTI can be configured to trigger a flush of trace data to the TPIU. For example, you can configure channel 0 to trigger output 2 in CTI. Then configure trigger input T3 to channel 0 in FPGA-CTI. Trace data is flushed to the TPIU when a trigger is received at trigger output 2 in CTI.