Intel Agilex® 7 Hard Processor System Technical Reference Manual

ID 683567
Date 1/11/2024
Public
Document Table of Contents

16.4.2.4.1. Interrupt Setting and Clearing

The SDIO Interrupts, Receive FIFO Data Request, and Transmit FIFO Data Request interrupts are set by level‑sensitive interrupt sources. Therefore, the interrupt source must be first cleared before you can reset the interrupt’s corresponding bit in the rintsts register to 0.

For example, on receiving the Receive FIFO Data Request interrupt, the FIFO buffer must be emptied so that the FIFO buffer count is not greater than the RX watermark, which causes the interrupt to be triggered.

The rest of the interrupts are triggered by single clock‑pulse‑width sources.