DSP Builder for Intel® FPGAs (Advanced Blockset): Handbook

ID 683337
Date 12/04/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

1.5. FPGA Architecture Features for DSP Designs

You can configure FPGAs to operate in different modes corresponding to your required functionality. You can use a suitable hardware description language (HDL) such as VHDL or Verilog HDL to implement any hardware design. Thus, the same FPGA can implement a DSL router, a DSL modem, a JPEG encoder, a digital broadcast system, or a backplane switch fabric interface.

High-density FPGAs incorporate embedded silicon features that can implement complete systems inside an FPGA, creating a system on a programmable chip (SOPC) implementation. Embedded silicon features such as embedded memory, DSP blocks, and embedded processors are ideally suited for implementing DSP functions such as finite impulse response (FIR) filters, fast Fourier transforms (FFTs), correlators, equalizers, encoders, and decoders.

The embedded DSP blocks provide functionality such as addition, subtraction, and multiplication, which are common arithmetic operations in DSP functions. Generally, Intel FPGAs offer much more multiplier bandwidth than DSP processors, which only offer a limited number of multipliers.

One determining factor of the overall DSP bandwidth is the multiplier bandwidth, therefore the overall DSP bandwidth of FPGAs can be much higher using FPGAs than with DSP processors.

Many DSP applications use external memory devices to manage large amounts of data processing. The embedded memory in FPGAs meets these requirements and also eliminates the need for external memory devices in some cases.

Embedded processors in FPGAs provide versatile system integration because of flexible partitioning of the system between hardware and software. You can implement the system’s software components in the embedded processors and implement the hardware components in the FPGA's general logic resources. Intel devices provide a choice between embedded soft core processors and embedded hard core processors.

You can implement soft core processors such as the Nios® II embedded processor in FPGAs and add multiple system peripherals. The Nios® II processor supports a user-determinable multimaster bus architecture that optimizes the bus bandwidth and removes potential bottlenecks found in DSP processors. You can use multimaster buses to define as many buses and as much performance as needed for a particular application. Off-the-shelf DSP processors make compromises between size and performance when they choose the number of data buses on the chip, potentially limiting performance.

Soft embedded processors in FPGAs provide access to custom instructions such as the MUL instruction in Nios® II processors that can perform a multiplication operation in two clock cycles using hardware multipliers. FPGA devices provide a flexible platform to accelerate performance-critical functions in hardware because of the configurability of the device’s logic resources. DSP processors have predefined hardware accelerator blocks, but FPGAs can implement hardware accelerators for each application, allowing the best achievable performance from hardware acceleration. You can implement hardware accelerator blocks with parameterizable IP functions or from scratch using HDL.

Intel offers many IPs for DSP design on FPGAs. You can parameterize Intel DSP IP for the most efficient hardware implementation and to provide maximum flexibility. You can easily port the IP to new FPGA families, leading to higher performance and lower cost. The flexibility of programmable logic and soft IP allows you to quickly adapt your designs to new standards without waiting for long lead times usually associated with DSP processors.