Intel® MAX® 10 High-Speed LVDS I/O User Guide

Download PDF
ID 683760
Date 11/01/2021
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. Intel® MAX® 10 High-Speed LVDS I/O Overview 2. Intel® MAX® 10 High-Speed LVDS Architecture and Features 3. Intel® MAX® 10 LVDS Transmitter Design 4. Intel® MAX® 10 LVDS Receiver Design 5. Intel® MAX® 10 LVDS Transmitter and Receiver Design 6. Intel® MAX® 10 High-Speed LVDS Board Design Considerations 7. Soft LVDS IP Core References 8. Intel® MAX® 10 High-Speed LVDS I/O User Guide Archives 9. Document Revision History for Intel® MAX® 10 High-Speed LVDS I/O User Guide
1. Intel® MAX® 10 High-Speed LVDS I/O Overview x
1.1. Soft LVDS Implementation Overview
2. Intel® MAX® 10 High-Speed LVDS Architecture and Features x
2.1. Intel® MAX® 10 LVDS Channels Support 2.2. Intel® MAX® 10 LVDS SERDES I/O Standards Support 2.3. Intel® MAX® 10 High-Speed LVDS Circuitry 2.4. Intel® MAX® 10 High-Speed LVDS I/O Location 2.5. Differential I/O Pins in Low Speed Region
3. Intel® MAX® 10 LVDS Transmitter Design x
3.1. High-Speed I/O Transmitter Circuitry 3.2. LVDS Transmitter Programmable I/O Features 3.3. LVDS Transmitter I/O Termination Schemes 3.4. LVDS Transmitter FPGA Design Implementation 3.5. LVDS Transmitter Debug and Troubleshooting
3.2. LVDS Transmitter Programmable I/O Features x
3.2.1. Programmable Pre-Emphasis 3.2.2. Programmable Differential Output Voltage
3.3. LVDS Transmitter I/O Termination Schemes x
3.3.1. Emulated LVDS External Termination 3.3.2. Sub-LVDS Transmitter External Termination 3.3.3. SLVS Transmitter External Termination 3.3.4. Emulated RSDS, Emulated Mini-LVDS, and Emulated PPDS Transmitter External Termination
3.4. LVDS Transmitter FPGA Design Implementation x
3.4.1. Soft LVDS IP Core in Transmitter Mode 3.4.2. High-Speed I/O Timing Budget 3.4.3. Guidelines: LVDS Transmitter Channels Placement 3.4.4. Guidelines: LVDS Channels PLL Placement 3.4.5. Guidelines: LVDS Transmitter Logic Placement 3.4.6. Guidelines: Enable LVDS Pre-Emphasis for E144 Package
3.4.1. Soft LVDS IP Core in Transmitter Mode x
3.4.1.1. PLL Source Selection for Soft LVDS IP Core 3.4.1.2. Guidelines: LVDS TX Interface Using External PLL 3.4.1.3. Initializing the Soft LVDS IP Core
3.4.1.1. PLL Source Selection for Soft LVDS IP Core x
3.4.1.1.1. Instantiate Soft LVDS IP Core with Internal PLL 3.4.1.1.2. Instantiate Soft LVDS IP Core with External PLL
3.4.1.2. Guidelines: LVDS TX Interface Using External PLL x
3.4.1.2.1. ALTPLL Signal Interface with Soft LVDS Transmitter 3.4.1.2.2. Determining External PLL Clock Parameters for Soft LVDS Transmitter
3.4.2. High-Speed I/O Timing Budget x
3.4.2.1. Transmitter Channel-to-Channel Skew
3.5. LVDS Transmitter Debug and Troubleshooting x
3.5.1. Perform RTL Simulation Before Hardware Debug 3.5.2. Geometry-Based and Physics-Based I/O Rules
4. Intel® MAX® 10 LVDS Receiver Design x
4.1. High-Speed I/O Receiver Circuitry 4.2. LVDS Receiver I/O Termination Schemes 4.3. LVDS Receiver FPGA Design Implementation 4.4. LVDS Receiver Debug and Troubleshooting
4.1. High-Speed I/O Receiver Circuitry x
4.1.1. Soft Deserializer 4.1.2. Data Realignment Block (Bit Slip)
4.2. LVDS Receiver I/O Termination Schemes x
4.2.1. LVDS, Mini-LVDS, and RSDS Receiver External Termination 4.2.2. SLVS Receiver External Termination 4.2.3. Sub-LVDS Receiver External Termination 4.2.4. TMDS Receiver External Termination 4.2.5. HiSpi Receiver External Termination 4.2.6. LVPECL External Termination
4.3. LVDS Receiver FPGA Design Implementation x
4.3.1. Soft LVDS IP Core in Receiver Mode 4.3.2. High-Speed I/O Timing Budget 4.3.3. Guidelines: Floating LVDS Input Pins 4.3.4. Guidelines: LVDS Receiver Channels Placement 4.3.5. Guidelines: LVDS Channels PLL Placement 4.3.6. Guidelines: LVDS Receiver Logic Placement
4.3.1. Soft LVDS IP Core in Receiver Mode x
4.3.1.1. PLL Source Selection for Soft LVDS IP Core 4.3.1.2. Guidelines: LVDS RX Interface Using External PLL 4.3.1.3. Initializing the Soft LVDS IP Core
4.3.1.1. PLL Source Selection for Soft LVDS IP Core x
4.3.1.1.1. Instantiate Soft LVDS IP Core with Internal PLL 4.3.1.1.2. Instantiate Soft LVDS IP Core with External PLL
4.3.1.2. Guidelines: LVDS RX Interface Using External PLL x
4.3.1.2.1. ALTPLL Signal Interface with Soft LVDS Receiver 4.3.1.2.2. Determining External PLL Clock Parameters for Soft LVDS Receiver
4.3.2. High-Speed I/O Timing Budget x
4.3.2.1. Receiver Input Skew Margin 4.3.2.2. Guidelines: LVDS Receiver Timing Constraints
4.3.2.1. Receiver Input Skew Margin x
4.3.2.1.1. RSKM Equation 4.3.2.1.2. Example: RSKM Calculation
4.4. LVDS Receiver Debug and Troubleshooting x
4.4.1. Perform RTL Simulation Before Hardware Debug 4.4.2. Geometry-Based and Physics-Based I/O Rules
5. Intel® MAX® 10 LVDS Transmitter and Receiver Design x
5.1. Transmitter–Receiver Interfacing 5.2. LVDS Transmitter and Receiver FPGA Design Implementation 5.3. LVDS Transmitter and Receiver Debug and Troubleshooting
5.2. LVDS Transmitter and Receiver FPGA Design Implementation x
5.2.1. LVDS Transmitter and Receiver PLL Sharing Implementation 5.2.2. Initializing the Soft LVDS IP Core
5.3. LVDS Transmitter and Receiver Debug and Troubleshooting x
5.3.1. Perform RTL Simulation Before Hardware Debug 5.3.2. Geometry-Based and Physics-Based I/O Rules
6. Intel® MAX® 10 High-Speed LVDS Board Design Considerations x
6.1. Guidelines: Improve Signal Quality 6.2. Guidelines: Control Channel-to-Channel Skew 6.3. Guidelines: Determine Board Design Constraints 6.4. Guidelines: Perform Board Level Simulations
7. Soft LVDS IP Core References x
7.1. Soft LVDS Parameter Settings 7.2. Soft LVDS Interface Signals
1. Intel® MAX® 10 High-Speed LVDS I/O Overview
2. Intel® MAX® 10 High-Speed LVDS Architecture and Features
3. Intel® MAX® 10 LVDS Transmitter Design
4. Intel® MAX® 10 LVDS Receiver Design
5. Intel® MAX® 10 LVDS Transmitter and Receiver Design
6. Intel® MAX® 10 High-Speed LVDS Board Design Considerations
7. Soft LVDS IP Core References
8. Intel® MAX® 10 High-Speed LVDS I/O User Guide Archives
9. Document Revision History for Intel® MAX® 10 High-Speed LVDS I/O User Guide

3.4.1.2. Guidelines: LVDS TX Interface Using External PLL

You can instantiate the Soft LVDS IP core with the Use External PLL option. Using external PLL, you can control the PLL settings. For example, you can dynamically reconfigure the PLL to support different data rates and dynamic phase shifts. To use this option, you must instantiate the ALTPLL IP core to generate the various clock signals.

If you turn on the Use External PLL option for the Soft LVDS transmitter, you require the following signals from the ALTPLL IP core:

  • Serial clock input to the tx_inclock port of the Soft LVDS transmitter.
  • Parallel clock used to clock the transmitter FPGA fabric logic and connected to the tx_syncclock port.
Related Information
Level Two Title