Multi Channel DMA Intel® FPGA IP for PCI Express User Guide

ID 683821
Date 4/20/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

3.5. Hard IP Reconfiguration Interface

The Hard IP Reconfiguration Interface (usr_hip_reconfig_*) is supported on H-Tile, F-Tile and P-Tile. The Hard IP Reconfiguration interface is an Avalon-MM slave interface with a 21-bit address bus and an 8-bit data bus. You can use this bus to dynamically modify the value of configuration registers. This interface can be used in Endpoint and Root Port modes. It must be enabled if Root Port mode is selected. When you select Root Port mode, the IP Parameter Editor automatically enables this interface. In Root Port mode, the application logic uses the Hard IP reconfiguration interface to access its PCIe configuration space to perform link control functions such as Hot Reset, Link Disable or Link Retrain.

Note: After a warm reset or cold reset, changes made to the configuration registers of the Hard IP via the Hard IP reconfiguration interface are lost and these registers revert back to their default values.