Multi Channel DMA Intel® FPGA IP for PCI Express User Guide

ID 683821
Date 4/20/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

4.5. Bursting Avalon-MM Master (BAM) Interface

Table 41.  BAM Signals
Signal Name I/O Type Description
bam_address_o[<n>:0] Output Represents a byte address. The value of address must align to the data width. <n>: {vfactive+$clog2(PF_NUM)+11+3+BAR_addr_width}-1, where vfactive=1, PF_NUM=number of PFs enabled, 11=$clog2(2048), 3=bar_num width, BAR_addr_width= 22 bits (H-Tile) / max(BAR_addr_width) (P-Tile and F-Tile)

x16: bam_byteenable_o[63:0]

x8: bam_byteenable_o[31:0]

Output Enables one or more specific byte lanes during transfers on interfaces

x16: bam_burstcount_o[3:0]

x8: bam_burstcount_o[4:0]

Output Used by a bursting master to indicate the number of transfers in each burst.
bam_read_o Output Asserted to indicate a read transfer.

x16: bam_readdata_i[511:0]

x8: bam_readdata_i[255:0]

Input Read data from the user logic in response to a read transfer
bam_readdatavalid_i Input When asserted, indicates that the readdata signal contains valid data. For a read burst with burstcount value <n>, the readdatavalid signal must be asserted <n> times, once for each readdata item.
bam_write_o Output Asserted to indicate a write transfer

x16: bam_writedata_o[511:0]

x8: bam_writedata_o[255:0]

Output Data for write transfers
bam_waitrequest_i Input When asserted, indicates that the Avalon-MM slave is not ready to respond to a request.