Nios® V Embedded Processor Design Handbook

ID 726952
Date 12/04/2023

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents Updating an Application Image

The Add Application-1 Image, Option 5 performs RSU Image update by adding Application-1 image into RSU slot 1, called App-1. It reads the Application-1 RPD image from the QSPI flash, starting from address 0x3000000. After the RPD image is read successfully, the software proceeds to add and verify the configuration bitstream into App-1 slot. Once the verification completes, you can proceed to trigger reconfiguration with Application-1 Image in the table Trigger Device Reconfiguration.

Application Image Update Log

Reading the Application-1 image based on RPD memory map....
Read Successfully.
Slot App-1 created at 0x1800000 with size =  0x460000 bytes.
Slot 1 is erased.
      NAME: App-1
    OFFSET: 0x0000000001800000
      SIZE: 0x00460000
  PRIORITY: [disabled]
Slot 1 was programmed with size=4587520.
Slot 1 was verified with size=4587520.
Add and Verify the image successfully in Slot 1

Please proceed with Option 4 - Trigger reconfiguration to Application Images. 
And select Application-1 Image.