Intel® Quartus® Prime Pro Edition User Guide: Debug Tools

ID 683819
Date 10/13/2021
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

2.10. Signal Tap Logic Analyzer Design Examples

Application Note 845: Signal Tap Tutorial for Intel Arria 10 Partial Reconfiguration Design includes a design example that demonstrates Signal Tap debugging with a partial reconfiguration design. The design example has one 32-bit counter. At the board level, the design connects the clock to a 50MHz source, and connects the output to four LEDs on the FPGA. Selecting the output from the counter bits in a specific sequence causes the LEDs to blink at a specific frequency example demonstrates initiating a DMA transfer. The tutorial demonstrates how to tap signals in a PR design by extending the debug fabric to the PR regions when creating the base revision, and then defining debug components in the implementation revisions.

Application Note 446: Debugging Nios® II Systems with the Signal Tap Logic Analyzer includes a design example with a Nios® II processor, a direct memory access (DMA) controller, on-chip memory, and an interface to external SDRAM memory. After you press a button, the processor initiates a DMA transfer, which you analyze using the Signal Tap logic analyzer. In this example, the Nios® II processor executes a simple C program from on-chip memory and waits for you to press a button.

Did you find the information on this page useful?

Characters remaining:

Feedback Message