Intel® Quartus® Prime Pro Edition User Guide: Debug Tools

ID 683819
Date 10/13/2021
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

2.9.5. Debugging Devices that use Configuration Bitstream Security

Some Intel FPGA device families support bitstream decryption during configuration using an on-device AES decryption engine. You can still use the Signal Tap logic analyzer to analyze functional data within the FPGA with such devices. However, JTAG configuration is not possible after programming the security key into the device.

Use an unencrypted bitstream during the prototype and debugging phases of the design, to allow programming file generation and reconfiguration of the device over the JTAG connection while debugging.

If you must use the Signal Tap logic analyzer with an encrypted bitstream, first configure the device with an encrypted configuration file using Passive Serial (PS), Fast Passive Parallel (FPP), or Active Serial (AS) configuration modes. The design must contain at least one instance of the Signal Tap logic analyzer. After configuring the FPGA with a Signal Tap instance and the design, you can open the Signal Tap logic analyzer GUI and scan the chain to acquire data with the JTAG connection.